Welcome to Shenzhen Zhicheng JingZhan Technology Co., Ltd!

Chinese  丨  English  丨HOME  丨 Products  丨  Contact

Shenzhen Zhicheng JingZhan Technology Co., Ltd

National Service Hotline

Shenzhen Zhicheng JingZhan Technology Co., Ltd
All categories

Product

wds-650
650-
650参数
650解析图

WDS-650

wds-650
650-
650参数
650解析图
Product description
technical parameter

Features of WDS-650 rework station:

Independent three temperature zone temperature control system:

The upper and lower temperature zones are heated by hot air. The IR preheating zone is heated by imported infrared gold-plated light tubes. The temperature rises quickly and the temperature is accurately controlled at ± 1 ℃. 8-stage temperature control can make the PCB board heat evenly, preheat the bottom of the large IR, make the entire PCB temperature even, prevent deformation, ensure the welding effect, and the infrared gold-plated light tube can independently control the heating.

The upper and lower hot air heating can locally heat the BGA chip and the PCB board at the same time, and then supplement the large area infrared heater to preheat the bottom of the PCB board, which can completely avoid the deformation of the PCB board during the repair process; by selecting Use the upper temperature zone or the lower temperature zone alone, and freely combine the energy of the upper and lower heating elements.

Select high-precision K-type thermocouple closed-loop control and PID parameter self-tuning system; can display four temperature curves and store multiple sets of user data at the same time, and have instant curve analysis function; external temperature measurement interface realizes precise temperature detection and can be used at any time Analyze and proofread the temperature curve of the actual collected BGA. And can carry out curve analysis, setting and correction of temperature parameters at any time on the touch screen;

Precise optical alignment system: Adopt high-definition digital camera color optical vision alignment system, with functions of splitting, magnifying, reducing, and auto-focusing, and equipped with automatic color difference resolution and brightness adjustment device, which can adjust imaging sharpness; with 15 ″ HD LCD display.

Multifunctional and humanized operating system

Adopt high-definition touch screen man-machine interface, integrated design of upper heating device and placement head, equipped with a variety of titanium alloy BGA nozzles, which can be rotated 360 ° at any time, easy to install and replace.

The X, Y axis and R angles are fine-adjusted with a micrometer, and the alignment is accurate with an accuracy of ± 0.01mm.

Superior safety protection function: It has an alarm function after welding or de-soldering is completed. In the case of temperature runaway, the circuit can be automatically powered off and has double over-temperature protection function. The temperature parameters are protected by password to prevent arbitrary modification and other safety protection and foolproof functions.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

WDS-650 product specifications and technical parameters:

power supply

Ac220v±10%,50/60hz

Total power

5200W

Heater power

Upper hot air heating, maximum 1200W

 

Lower hot air heating, maximum 1200W

 

Infrared preheating at the bottom, maximum 4000w

pcb positioning method

V-shaped card slot + universal fixture + laser positioning lamp for fast positioning.

Temperature control method

High-precision K-type thermocouple closed-loop control, independent temperature measurement from top to bottom, temperature accuracy up to plus or minus 1 degree;

Selection of electrical appliances

Highly sensitive touch screen + temperature control module + microcontrollers + stepper driver

Applicable PCB size

Max410 × 380mm Min 10 × 10 mm

Applicable chip size

 Max70 × 70mm Min 1 × 1 mm

Applicable pcb thickness

0.3-5mm

Alignment system

Optical diamond mirror + high-definition industrial camera,

Mounting accuracy

±0.01mm

Temperature measurement interface

3

Mounting maximum load

150G

Tin point monitoring

Optional external camera can be used to monitor the solder ball melting process during welding

Camera in and out

Optical lens electric in and out;

Dimensions

L600 × W640 × H850mm

Machine weight

About 60kg

Other features

Five working modes, free switching between automatic / manual mode, 

 

Previous

© 2020 Shenzhen Zhicheng JingZhan Technology Co., Ltd Copyright   All Rights Reserved    粤ICP备14033356号   Powered by www.300.cn